| FEATURES |
- 5 HP geared head drive (12 steps) horizontal spindle with #40 taper.
7.5HP motor and #50 taper of hotizontal spindle.(Optional)
- The horizontal spindle speed goes as low as 45 rpm for heavy duty milling jobs.
- The saddle is built with 2 oversized box ways, hardened and ground, to ensure the stability of the table under heavy milling conditions.
- The universal table can swivel for more versatile milling.(Optional)
- A single powerful motor drives the feed and rapid traverse of the table, saddle and knee. Powerful knee feeds allow deep boring and drilling of large work piece. It also allows simultaneous multi-axes feeds.
- The machine is equipped with Climb Milling Compensator for smooth and stable horizontal climb milling operations.
- The adjustable automatic lube system maintains proper lubrication at desired intervals to the saddle, the table, the knee and the column.
- The table has slip clutch for overload protection, this is superior to the shear pin design.
- Manual movement of the table is controlled by hand wheel installed at the front of the table for easy operation.
- Gears and shafts are made out of Chrom-Moly material, hardened and ground for precision and durability. They are lubricated constantly via a pressurized lube system.
|
| |
TWO MASSIVE BOX-TYPE WAYS
Two huge hardened and ground ways assure that the table will stay where it belongs. these symmetrical ways keep the table balanced, as well as providing additional contact surface for superior accuracy and rigidity. |
|
 |
|
 |
|
AUTOMATIC LUBRICATION
The Auto Lube System is wired through the main power box, it maintains proper lubrication levels at desires intervals to all table saddle, and column slideways. this system ensures a clean supply of oil at all times for trouble-free operation. |
|
| |
CLIMB MILLING COMPENSATOR
This permits smooth and stable horizontal climb milling with only the twist of a wrist. This gives you much more versatility for horizontal work. |
|
 |
|
|
FAX : 886-4-25270957